Nimbus Technologies

Features

• Automatic RS-485 Direction Control
• Avoids lightning strikes and EMI/RFI interference
• ESD Protection for the RS-232/422/485 Data Line

IntroductionThe I-2542 series of Single-Strand Fiber Converters supports Wavelength Division Multiplexing (WDM) technology that allows two independent data communication channels to transmit and receive over one standard, single mode, fiber optic line. This not only doubles your existing bandwidth, but also effectively reduces the cost of creating a new fiber optic infrastructure.

The I-2542-A and I-2542-B is a pair.

• 1-Port RS-232 To RS-422/485 Converter 
Plug & Play installation
• Built in 15KV ESD protection for signals
•  RS-422/485 surge protection
• Built in 100 ohm Termination resistor

Most RS-232 devices don't support device addressing. The ICPDAS I-752n series assigns a unique address to any RS-232 device installed on an RS-485 network. When the Host PC sends a command with a device address to the RS-485 network, the destination I-752n module will remove the address field, and then pass the other commands to its local RS-232 devices. The response from the local RS-232 devices will be returned to the Host PC via the I-752n module. ICP DAS I-752n products are unique in that they are a Master-type converter that use our R.O.C. Patent 086674, while most other converters are a Slave-type, which cannot operate without a Host PC. In real industrial applications, many users are not satisfied with Slave-type converters as they cannot be adapted to individual requirements

Ordering Information,

• I-7521 CR - Addressable RS-485 to RS-232/RS-485 Converter with 2 DI and 3 DO (Blue Cover) (RoHS)

• I-7521D CR- Addressable RS-485 to RS-232/RS-485 Converter with 2 DI, 3 DO and 7-Segment LED Display (Blue Cover) (RoHS) 

• I-7521D-G CR- Addressable RS-485 to RS-232/RS-485 Converter with 2 DI, 3 DO and 7-Segment LED Display (Gray Cover) (RoHS)

•  I-7522 CR- Addressable RS-485 to 2 x RS-232/RS-485 Converter with 2 DI and 1 DO (Blue Cover) (RoHS)

• I-7522D CR- Addressable RS-485 to 2 x RS-232/RS-485 Converter with 2 DI, 1 DO and 7-Segment LED Display (Blue Cover) (RoHS) 

• I-7523 CR- Addressable RS-485 to 3 x RS-232/RS-485 Converter with 1 DI (Blue Cover) (RoHS) 

• I-7523D CR- Addressable RS-485 to 3 x RS-232/RS-485 Converter with 1 DI and 7-Segment LED Display (Blue Cover) (RoHS)

We are engaged in offering our clients a superior quality range of RS232 To RS485/RS422 Converters.

Features:

• Output: RS-485/RS-422 protocol
• Speed: “Self Tuner” inside, auto switching baud rate
• 256 modules max. in one RS-485 network without repeater
• 2048 modules max. in one RS-485 network with repeater
• I-7520R model is used for PLC user. The design of isolation between I-7520 and I-7520R is different If the user wants to supply the power from PLC, he should use the I-7520R. Otherwise, the isolation will be broken. For Supply from PC side Use I 7520.

Features:-
•Automatic RS-485 Direction Control 
• Transmission Speed of up to 115200 bps
• 2-way 3000 VDC Isolation Protection
• ESD Protection for RS-485 Data LineIntroductionThe I-7510 provides 2-way optical isolation between one piece of RS-485 equipment and the rest of the system. It can also be used as a repeater to extend the transmission of an existing network. Additionally, an RS-485 system can be expanded beyond the 256 node limitation imposed by the standard. It can also be used to convert a 2-wire RS-485 signal, and vice versa.

The I-7510AR is exactly the same as the I-7510A, except for the isolation side. The isolation side of the I-7510A is located in the input interface circuit, but the isolation side of the I-7510AR is located in the input and output interface circuit. In other words the I-7510AR is 3-way isolation repeater module.

• I-7510- Isolated RS485 Repeater
• I-7510A- Isolated RS-422/485 Repeater/Converter.
• I-7510AR- Three Way Isolated RS-422/485 Repeater/Converter.
• I-7510P- Three Way 5 kV Isolated RS-485 Repeater.

Features

• Incorporates any RS-232 serial device in Ethernet
• Data transmission via Virtual COM or raw TCP connection
• VxComm Driver for 32-bit and 64-bit Windows 7 SP1/10/2012/2016
• Built-in High-Performance MiniOS7 from ICP DAS
• Watchdog Timer suitable for use in harsh environments
• Palm-Sized with multiple Serial Ports
• Power Reverse Polarity Protection

IntroductionWe are one of the leading firms engaged in distributing and supplying of automation and data acquisition systems that find their usage in Steel Industry, Chemical plants, etc. All these systems are rugged in design as well as easy to operate.