Wi-Fi Device

Our product range includes a wide range of ethernet to wi-fi and wi-fi i/o module.

Ethernet to Wi-Fi

Request Callback

₹ 17000 / Piece Get Latest Price

Product Brochure
PortsUSB & ETHENET PORT
ColorBlue
Warranty1 Year
Power Consumption1.5W
Storage Temp-30C TO +80C
Frequency2.4 GHz: CH1~11 5 GHz: CH36/40/44/48
Antenna GainOmni-Directional 3 dBi @ 2.4 GHz 5.5 dBi @ 5 GHz
Wireless StandardIEEE 802.11 a/b/g/n
DC Power Adapter10 ~ 30VDC
Operating Temperature-25C TO +75C

Minimum order quantity: 1 Piece

Features
  • Frequency: 2.4/5 GHz.
  • Full compatible with IEEE 802.11 a/b/g/n.
  • Support Wi-Fi Limit-AP and Infrastructure mode.
  • Support WPA-PSK, WPA2-PSK for Wi-Fi encryption.
  • Plug-and-Play Ethernet to Wi-Fi connectivity.
  • USB-based configuration.
  • No driver installation required.
  • Built-in Watchdog.
  • Extended operating temperature range (-25°C ~ +75°C).
IntroductionThe WF-2572 is an Industrial Ethernet to Wi-Fi Bridge. The device only needs to connect the Ethernet cable with WF-2572 that can create an IEEE 802.11 a/b/g/n wireless personal network. The interface between Ethernet and Wi-Fi use transparent transmission so that it can convert Wi-Fi to wire internet without complex settings. The WF-2572 also supports dual bands (2.4/5 GHz). The 2.4 GHz is more crowded than 5 GHz. Therefore, the devices on 2.4 GHz suffer much more interference than the ones on 5 GHz. The WF-2572 will have less interference on 5 GHz.

LED Indicators
Status 1 x PWR
1 x LINK
1 x COMM
1 x High
1 x Mid
1 x Low
Wi-Fi
Transmission Distance (LoS) 50 m (LOS)
Standard IEEE 802.11 a/b/g/n
Operation Mode Limit-AP & Infrastructure
Encryption Open/WPA/WPA2
Channels 2.4 GHz: CH1~11
5 GHz: CH36、40、44、48
Antenna Omni-Directional
3 dBi @ 2.4 GHz
5.5 dBi @ 5 GHz
Ethernet
Ports 1 x RJ-45, 100Base-TX Ethernet Controller (Auto-MDIX)
USB
Specification USB 2.0 Full-Speed
Connector USB type B
Power
Input Range +10 ~ +30 VDC
Consumption 1.6 W
Mechanical
Casing Plastic
Dimensions (mm) 33 x 95 x 120 (W x L x H)
Installation DIN-Rail
Environment
Operating Temperature -25℃ ~ +75℃
Storage Temperature -30℃ ~ +80°C
Humidity 10% ~ 95% (non-condensing)

Wi-Fi I/O Module

Request Callback

₹ 25000 / Piece Get Latest Price

Product Brochure
Usage/ApplicationIndustrial
Model Name/NumberWF-2017/WF-2015/WF-2019-S/WF-2026/WF-2042/WF-2051/WF-2055/WF-2060
Type Of MountingDIN-Rail
No. Of Channels8/16 Analog Input
Operational Temperature-25C - +75C
DC Power supply10V ~ 30V

Minimum order quantity: 1 Piece

Features
• 8-channel Differential Analog Input
• 16-channel Single-ended Analog Input
• Compatible with IEEE 802.11b/g standards
• Support WEP, WPA and WPA2 wireless encryption
• Support Modbus/TCP and UDP protocols
• Support DHCP network configuration
• Wide Operating Temperature Range
• 4 kV ESD Protection
• Built-in Watchdog

Introduction:-
The WF-2017 is a Wi-Fi interface and 8-channel Differential/16-channel Single-Ended analog input module. The analog input range is software selectable and supports +/-10V, +/-5V, +/-1V, +/-500mV, +/-150mV, and +/-20mA. Differential and Single-ended mode is selected by jumpers. The WF-2017 also supports Modbus/TCP and UDP protocols.

Isolation
Intra-module Isolation Power: 3000 VDC
Wi-Fi
Transmission Distance (LoS) 50 meters (LOS)
Standard IEEE 802.11 b/g*
IEEE 802.11 b/g/n**
RX Sensitivity -83 dBm @ 11 Mbps*
-93 dBm @ 11 Mbps**
Output Power 8 dBm @ 11 Mbps*
14 dBm @ 11 Mbps**
Mode Infrastructure & Ad-hoc*
Infrastructure & Limit-AP**
Encryption WEP, WPA and WPA2
Antenna 5 dBi (Omni-Directional)
Analog Input
Channels 8-ch Differential / 16-ch Single-ended (Note), (Jumper Selectable)
Type Voltage
Current
Range Voltage : ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V
Current : 0 ~ +20 mA, +4 ~ +20 mA, ±20 mA (Jumper Selectable)
Resolution 16-bit
Accuracy ±0.1% of FSR
Sampling Rate 10 Hz (Total)
Input Impedance Differential: 2 MΩ
Single-ended: 1 MΩ
Common Mode Rejection 86 dB Min.
Normal Mode Rejection 100 dB
Overvoltage Protection Differential: 240 Vrms (2 MΩ)
Single-ended: 150 Vrms (1 MΩ)
Individual Channel Configuration Yes
Zero Drift ±20 μV/°C
Span Drift ±25 ppm/°C
Power
Input Range +10 VDC ~ +30 VDC
Consumption 2.2 W
Mechanical
Dimensions (mm) 33 x 127 x 107 (W x L x H) (Without antenna)
Installation DIN-Rail Mounting
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing

Ordering Information:-
  • WF-2015- Wi-Fi I/O Module with 6-ch RTD Input.
  • WF-2017- Wi-Fi I/O Module with 8-ch/16-ch AI.
  • WF-2019/S- Wi-Fi I/O Module with 10-ch Universal AI.
  • WF-2026- Wi-Fi I/O Module with 5-ch AI, 2-ch AO, 2-ch DI and 3-ch DO.
  • WF-2042- Wi-Fi I/O Module with Isolated 16-ch (Sink, NPN) DO.
  • WF-2051- Wi-Fi I/O Module with Isolated 16-ch (Dry, Wet) DI.
  • WF-2055- Wi-Fi I/O Module with Isolated 8-ch (Dry, Wet) DI, Isolated 8-ch (Sink, NPN) DO.
  • WF-2060- Wi-Fi I/O Module with Isolated 6-ch (Dry, Wet) DI and 6-ch Relay.
X

Contact Us

R. Krishnan (CEO)
Nimbus Technologies
Plot No. C-9 Unit No 225, Globe Estate, Midc Phase, Dombivli East, Kalyan - 421203, Thane, Maharashtra, India

Get Directions
Send Email
Share: